Debem manufactured resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3000 rpm) for fast fluid transfer and/or drainage with flow rates ranging from 6 to 75 m³/h.
Debem manufactured resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3000 rpm) for fast fluid transfer and/or drainage with flow rates ranging from 6 to 75 m³/h. Their special open-impeller design allows pumping even with very dirty liquids having apparent viscosity up to 500 cps (at 20°C) and small suspended solids. There are two versions available with different internal mechanical seal depending on use, TL (lip seal) and TS (bellows seal).
Available in polypropylene, PVDF;
Positive suction head operation;
Mechanical bellows or lip seal;
Usable even with extremely dirty liquids;
Flow rates: from 6 to 75 m³/h;
Head: up to 38 mt;
Quick and easy maintenance;
Viscosity: up to 500 cps
European voltage motors: IP55 – F Class – 2-pole – 50 Hz – three-phase single – phase from 0,55 kw to 2,2 kw – 50/60 Hz
Descrption of the pump
Resin-encased horizontal centrifugal pumps feature a solid pump casing and a lantern for connecting the electric motor and inspection of the mechanical seal. The open impeller is fitted to the pump shaft that is integral with the drive shaft of the electric motor. The shaft mechanical seal is housed at the rear of the impeller.
A = electric motor
B = inspection lantern
C = mechanical seal
D = impeller
E = delivery duct
F = intake duct
How it works
The impeller is integral with the shaft and direct-drive electric motor and is rotated at a preset speed with the centrifugal effect producing suction on the intake side and discharge on the delivery side.